The Mobius 0.3mm is Gaahleri's Premium Series airbrush and a step up from the GHAD-39. A 0.3mm nozzle is a good all-round size for miniatures. It's fine enough for glazes and zenithal highlights, and it still moves enough paint to base coat a unit.
The nozzle has spiral air channels, and Gaahleri rates it to spray from about 10 psi. That matters on miniatures, because lower pressure means less overspray and fewer dry, grainy patches. A slot in the back of the handle gives you direct access to the trigger spring, so you can set the lever light or firm to suit your hand. The square lever gives your finger a flat pad to press, which is easier on long sessions.
The 1/3oz cup is polished inside. Paint doesn't cling to the walls, and a colour change takes a quick rinse. A quick adapter is included for hoses fitted with a quick-disconnect coupler.
In the box
Mobius 0.3mm airbrush
0.3mm nozzle, needle and nozzle cap
1/3oz polished gravity cup
Round narrow air cap
Quick adapter
Spare O-rings
Instructions
Specifications
Action: dual action
Feed: gravity
Needle and nozzle: 0.3mm
Cup: 1/3oz
Minimum working pressure: about 10 psi (Gaahleri's figure)
